The online brackets catalogue
ISSUE 9 APRIL 2022
FOR PRICING PHONE 01903 784242 or E-MAIL sales@lunds.co.uk
FOR PRICING PHONE 01903 784242 or E-MAIL sales@lunds.co.uk
The VEID Drop Brackets have been subject to extensive analysis by our structural engineers and we think that we have come up with a versatile design that can cope with most situations and wind loads. The materials used are steel section and will either be zinc plated or galvanised. The final finish is a powder coating in a low smoke, zero halogen to comply with LUL safety regulations. All fixings used are 8.8 grade, high tensile BZP.
STANDARD NEXT TRAIN INDICATOR VEID DROP BRACKETS
We have developed this unique design in conjunction with our structural engineers to produce a bracket that is capable of withstanding the unique stresses that a tunnel ring configuration causes. The oncoming train pushes air through the underground tunnels and when it reaches a station the force of air causes a severe draught that would put undue pressure on a static drop bracket. This is why our brackets are allowed to pivot freely to reduce the stresses. We have also established that when the drop arms are cut down to suit tunnel ring fixing the uneven arms cause a lateral twist through the vertical drop arms. This could result in buckling at the top plate fixing points and potential failure of the bracket. To overcome this we placed an additional pivot through the vertical drop arms and our calculations show that this addition stabilises the bracket sufficiently. The assembly has laser cut transitions and is allowed to swing freely with air movement and will be stable enough not to require any further bracing. The vertical arms can be moved along the bottom crossbar, when present, to allow convenient positioning on the tunnel ring or to miss any platform clutter. Safety is our main consideration and we believe that we have done everything possible to eliminate any cause of failure. Lindapter have developed a tunnel ring fixing that interfaces directly with our top fixing plates. These can be purchased directly from Lindapter International.
ADJUSTABLE DROP BRACKET FOR THE FM42W-D NTI VEID Part No. 070709-410 1000 Long Drop Part No. 070709-415 2000 Long Drop
Drop Bracket for the Infotec FM42W-D N.T.I. Display

Download the

data sheet

To achieve the assembly on the left you will need the FM42W VEID Bracket. This bracket allows flexibility for the placing of the drop arms and is ideal for both tunnel ring and canopy fixing.
Drop Bracket for the Infotec FM52W-D N.T.I. Display

Download the

data sheet

To achieve the assembly on the left you will need the FM52W VEID Bracket. This bracket allows flexibility for the placing of the drop arms and is ideal for both tunnel ring and canopy fixing.
500mm DROP ARMS FOR THE FM32W-D FM42W-D NTI VEID Part No. 070709-320
500mm Drop Arms for the Infotec FM32W-D - FM42W-D N.T.I. Display

Download the

data sheet

To achieve the assembly on the left you will need a pair of 500mm FM32W - FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.

Download the

data sheet

To achieve the assembly on the left you will need a pair of 1000mm FM32W - FM42W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
1000mm Drop Arms for the Infotec FM32W-D - FM42W-D N.T.I. Display
1000mm DROP ARMS FOR THE FM32W-D FM42W-D NTI VEID Part No. 070709-330
2000mm DROP ARMS FOR THE FM32W-D FM42W-D NTI VEID Part No. 070709-340
2000mm Drop Arms for the Infotec FM32W-D - FM42W-D N.T.I. Display
To achieve the assembly on the left you will need a pair of 2000mm FM32W - FM42W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.

Download the

data sheet

500mm DROP ARMS FOR THE FM52W-D NTI VEID Part No. 070709-360
500mm Drop Arms for the Infotec FM52W-D N.T.I. Display

Download the

data sheet

To achieve the assembly on the left you will need a pair of 500mm FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
1000mm DROP ARMS FOR THE FM52W-D NTI VEID Part No. 070709-370
1000mm Drop Arms for the Infotec FM52W-D N.T.I. Display

Download the

data sheet

To achieve the assembly on the left you will need a pair of 1000mm FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
2000mm DROP ARMS FOR THE FM52W-D NTI VEID Part No. 070709-380
2000mm Drop Arms for the Infotec FM52W-D N.T.I. Display

Download the

data sheet

To achieve the assembly on the left you will need a pair of 2000mm FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
ADJUSTABLE DROP BRACKET FOR THE FM52W-D NTI VEID Part No. 070709-420 1000 Long Drop Part No. 070709-425 2000 Long Drop
FOR PRICING PHONE 01903 784242 or E-MAIL sales@lunds.co.uk
The online brackets catalogue
ISSUE 9 APRIL 2022
FOR PRICING PHONE 01903 784242 or E-MAIL sales@lunds.co.uk
HOME HOME HOME
The online brackets catalogue
ISSUE 9 APRIL 2022
FOR PRICING PHONE 01903 784242 or E-MAIL sales@lunds.co.uk
The VEID Drop Brackets have been subject to extensive analysis by our structural engineers and we think that we have come up with a versatile design that can cope with most situations and wind loads. The materials used are steel section and will either be zinc plated or galvanised. The final finish is a powder coating in a low smoke, zero halogen to comply with LUL safety regulations. All fixings used are 8.8 grade, high tensile BZP.
STANDARD NEXT TRAIN INDICATOR VEID DROP BRACKETS
We have developed this unique design in conjunction with our structural engineers to produce a bracket that is capable of withstanding the unique stresses that a tunnel ring configuration causes. The oncoming train pushes air through the underground tunnels and when it reaches a station the force of air causes a severe draught that would put undue pressure on a static drop bracket. This is why our brackets are allowed to pivot freely to reduce the stresses. We have also established that when the drop arms are cut down to suit tunnel ring fixing the uneven arms cause a lateral twist through the vertical drop arms. This could result in buckling at the top plate fixing points and potential failure of the bracket. To overcome this we placed an additional pivot through the vertical drop arms and our calculations show that this addition stabilises the bracket sufficiently. The assembly has laser cut transitions and is allowed to swing freely with air movement and will be stable enough not to require any further bracing. The vertical arms can be moved along the bottom crossbar, when present, to allow convenient positioning on the tunnel ring or to miss any platform clutter. Safety is our main consideration and we believe that we have done everything possible to eliminate any cause of failure. Lindapter have developed a tunnel ring fixing that interfaces directly with our top fixing plates. These can be purchased directly from Lindapter International.
ADJUSTABLE DROP BRACKET FOR THE FM42W-D NTI VEID Part No. 070709-410 1000 Long Drop Part No. 070709-415 2000 Long Drop
Drop Bracket for the Infotec FM42W-D N.T.I. Display

Download the data

sheet

To achieve the assembly on the left you will need the FM42W VEID Bracket. This bracket allows flexibility for the placing of the drop arms and is ideal for both tunnel ring and canopy fixing.
Drop Bracket for the Infotec FM52W-D N.T.I. Display

Download the data

sheet

To achieve the assembly on the left you will need the FM52W VEID Bracket. This bracket allows flexibility for the placing of the drop arms and is ideal for both tunnel ring and canopy fixing.
500mm DROP ARMS FOR THE FM32W-D FM42W-D NTI VEID Part No. 070709-320
500mm Drop Arms for the Infotec FM32W-D - FM42W-D N.T.I. Display

Download the data

sheet

To achieve the assembly on the left you will need a pair of 500mm FM32W - FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.

Download the data

sheet

To achieve the assembly on the left you will need a pair of 1000mm FM32W - FM42W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
1000mm Drop Arms for the Infotec FM32W-D - FM42W-D N.T.I. Display
1000mm DROP ARMS FOR THE FM32W-D FM42W-D NTI VEID Part No. 070709-330
2000mm DROP ARMS FOR THE FM32W-D FM42W-D NTI VEID Part No. 070709-340
2000mm Drop Arms for the Infotec FM32W-D - FM42W-D N.T.I. Display
To achieve the assembly on the left you will need a pair of 2000mm FM32W - FM42W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.

Download the data

sheet

500mm DROP ARMS FOR THE FM52W-D NTI VEID Part No. 070709-360

Download the data

sheet

To achieve the assembly on the left you will need a pair of 500mm FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
1000mm DROP ARMS FOR THE FM52W-D NTI VEID Part No. 070709-370

Download the data

sheet

To achieve the assembly on the left you will need a pair of 1000mm FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
2000mm DROP ARMS FOR THE FM52W-D NTI VEID Part No. 070709-380
2000mm Drop Arms for the Infotec FM52W-D N.T.I. Display

Download the data

sheet

To achieve the assembly on the left you will need a pair of 2000mm FM52W Drop Arms. This bracket has fixed placing of the drop arms and is ideal for canopy fixing. All cabling is routed through the drop arm.
ADJUSTABLE DROP BRACKET FOR THE FM52W-D NTI VEID Part No. 070709-420 1000 Long Drop Part No. 070709-425 2000 Long Drop
500mm Drop Arms for the Infotec FM52W-D N.T.I. Display
1000mm Drop Arms for the Infotec FM52W-D N.T.I. Display